The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Introduction & first Question.


  • To: ukha_d@xxxxxxx
  • Subject: Re: Introduction & first Question.
  • From: "mmcaree" <michaelj@xxxxxxx>
  • Date: Thu, 11 Sep 2003 09:05:35 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I have ordered a NuVo Slimpese from Smarthome which is due for
delivery today ;-)
I will try to document the install and give it to Mark. It won't be
for a while becuase I have to put in the cables first :-(


Michael
BELFAST

--- In ukha_d@xxxxxxx, "Mark McCall" <lists@a...> wrote:
> > Just to introduce myself to the group, my name is Mark and i
live in
> > Surrey.
>
> Welcome Mark!
>
> > Although I can change harware etc later, I'm concerned about
putting
> > in the wrong wiring. My question is about setting up the speaker
> > cable. Should I just run in wall speaker cable from the patch
> > cupboard to each room and if so how to I control volume (on/off)
or
> > use Cat5e instead of the speaker cable. Also whats the best way
to
> > terminate the connections.
>
> I ran 79 Strand to the ceilings of most rooms...back to Node
Zero.  But I've
> never used any of it yet, preferring to use PC based players and
xboxes in
> rooms connected to hifis and pulling MP3s off the jukebox.
>
> M.



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.