RE: Faulty MV1000 ?

["Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>]

I have now bought 6 cameras for my Mv1000 and on testing all the
connections I have discovered input 1 and 2 will only display monochrome!

I have tried all my colour cameras on input's 1 & 2 and all display in
B&W only....

It is also vvveeerrryyyy slow....

Also when in the gallery page I can not select and display any image from
the camera 1 to 6 buttons! it tries then says done but no picture! the only
way I can change between cameras is to use the vc-admin route.....

As for your problem, make sure you have created the web pages with the
camera(s) connected....caught me out when I added the last 4 cameras and
the gallery page only displayed the original 2 cameras.....

A case of RTFM in my case....

B.

-----Original Message-----
From: Dean Barrett [mailto:dean@xxxxxxx]
Sent: 07 September 2003 20:22
To: ukha_d@xxxxxxx
Subject: [ukha_d] Faulty MV1000 ?


Decided to finally unpack my MV1000 and test it out.

Doesnt seem to work :(

I bought one for work, which works great, but this one seems to have a
problem.

I can connect via the serial port, set it up etc.

I can ping it, but there are no webpages :(

I've reset all the values etc. tried at differen IP addresses but
nothing...

Anyone got any suggestions ??




Dean.





** UKHA2004 BE THERE! ** - start planning now.

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/