[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Clipsal C_Touch Question
- To: <ukha_d@xxxxxxx>
- Subject: RE: Clipsal C_Touch Question
- From: "Dean Barrett" <dean@xxxxxxx>
- Date: Fri, 24 Oct 2003 12:49:45 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Rob
Niall confirmed that there is supposedly a limit to the reprogramming.
Not sure what happens when you reach it, but you can just send it back
to be 'cleared' and its ready to use again.
Dean.
-----Original Message-----
From: Rob Mouser [mailto:rmouser@xxxxxxx]
Sent: 24 October 2003 12:07
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Clipsal C_Touch Question
"Note: - The 5000CTA units have a limit of 100 reprogramming cycles.
If
this limit is exceeded, re-programming may no longer be possible."
So A BIG TIP IS don't play with it too much!
HTH!
Many thanks
Rob Mouser
[Non-text portions of this message have been removed]
Home |
Main Index |
Thread Index
|