The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Routing TV cables in the chimney


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: (FAO Keith) Re: Re: SCART Connections


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: (FAO Keith) Re: Re: SCART Connections
  • From: "Keith Doxey" <ukha@xxxxxxx>
  • Date: Wed, 8 Oct 2003 06:09:56 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

With reference to

http://www.diyha.co.uk/electronics/scart.html

20 VIDEO/Sync/Luminance Input

As per my message yesterday about ground pins,=20
join  4,5,9,13,14,17,18 together in the SCART=20
so you are guaranteed to get the ground pin!!!

That should work OK

Keith

www.diyha.co.uk
www.kat5.tv


> -----Original Message-----
> From: JAMES [mailto:JAMES9254@xxxxxxx]
> Sent: 07 October 2003 23:27
> To: ukha_d@xxxxxxx
> Subject: (FAO Keith) Re: [ukha_d] Re: SCART Connections
>=20
>=20
> Hi keith
>=20
> What it is i have a vdo satnav system with RGB output, the=20
> ftf that i got with it got nicked so i got a 5" tft witch=20
> only takes composite video so i got a RGB to composite=20
> converter from maplin witch is Scart RGB i had to cut the=20
> cable from the satnav comp and put a scart connector on the=20
> end of it. what i have done so far is soldered the RGB on and=20
> GND supply to red gnd and put a link over to green gnd and=20
> blue gnd thats it, where do i put the CSYNC? and is there any=20
> other bits i need to know about its the shinybow rgb=20
> converter if that helps. thx=20
>=20
> [Non-text portions of this message have been removed]
>=20
>=20
> ------------------------ Yahoo! Groups Sponsor=20
> ---------------------~-->
> The decade?s best-selling Family Tree Maker software is at=20
> Genealogy.com.
> Share your family tree with Family Tree Maker 11. Now at Genealogy.com
> Build a better family tree! Get Family Tree Maker 11 at Genealogy.com
> http://us.click.yahoo.com/cD_AeD/061GAA/a8ILAA/IBOolB/TM
> --------------------------------------------------------------
> -------~->
>=20
> UKHA 2004: 15th and 16th May 2004
>=20
> http://www.automatedhome.co.uk=20
> Post message: ukha_d@xxxxxxx=20
> Subscribe:  ukha_d-subscribe@xxxxxxx=20
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
> List owner:  ukha_d-owner@xxxxxxx=20
>=20
> Your use of Yahoo! Groups is subject to=20
> http://docs.yahoo.com/info/terms/=20
>=20
>=20
>=20
>=20


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.