The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Urgent - need an enclosure for 8 LD11s and 4 MCBs


  • To: ukha_d@xxxxxxx
  • Subject: Re: Urgent - need an enclosure for 8 LD11s and 4 MCBs
  • From: "Graham Howe" <graham@xxxxxxx>
  • Date: Fri, 28 Nov 2003 14:55:55 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

--- In ukha_d@xxxxxxx, "Paul Gale" <groups@s...> wrote:
> Yes - one that actually stocks them - might be difficult to find in=20
the time?
>=20
> Paul.
>=20

Well I just managed to get one of these=20
http://www.saip.com/ing/dettaglio1.asp?
CodiceFamiglia=3D04&CodiceProdotto=3D04a from my local Edmundson=20
Electrical. It is 36 way, three din rails and cost =A356.98 plus VAT=20
which I thought was reasonable. It includes blanks and a couple of=20
bars for commoning earth and neutral. Checking the Edmunson website=20
they don't list it, but when I went in I saw a couple up on the wall=20
crammed full of c-bus stuff, apparently clipsal supplied them for use=20
with the c-bus stuff.

They are a little chunky, mainly because they are weather proof, not=20
something I particularly needed, but thats all they had in stock and=20
anyway the rubber seal will probably help the noise reduction. They=20
are much smaller than the monsters I got for node zero and I'm sorely=20
tempted to get another couple for there too. But I just can face the=20
idea of disconnecting and re-connecting all those LD11s again!



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.