[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: NAS box options
- To: ukha_d@xxxxxxx
- Subject: Re: NAS box options
- From: "paul_watkin" <groups@xxxxxxx>
- Date: Fri, 28 Nov 2003 13:25:26 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Mine currently contains a standard Jetway micro ATX motherboard which
is dwarfed by the case.
There are 7 card slots in the backplane and the cross spar contains
clamps to firmly hold any full length cards.
There are two lots of three horizontaly mounted 5.25 drive bays at
the front as well as two 3.5" and then a further 2 X 3.5" can be
mounted on the cross spar, on mine all of the caddies are mounted
rubber washers.
hope that helps
Paul
--- In ukha_d@xxxxxxx, "Mark McCall" <lists@a...> wrote:
> > http://www.xcase.co.uk/acatalog/Rackmount_Cases.html
> > Second case down labelled S411.
>
> This looks cheap. Does this take a mother board too or is it only
for
> drives?
>
> M.
Home |
Main Index |
Thread Index
|