|
|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Cat5 pairs, RS232 and power
- To: <ukha_d@xxxxxxx>
- Subject: Cat5 pairs, RS232 and power
- From: "Paul Gale" <groups@xxxxxxx>
- Date: Thu, 27 Nov 2003 13:02:52 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Going to run an RS232 signal and 12V at 400mA through a single piece of
Cat=
5e.
To take advantage of the twisted nature of Cat5, should I be running Tx/Rx
=
on one pair or Tx/Gnd and Rx/Gnd on two pairs with the third pair carrying
=
+12V/Gnd?
What=92s best?
Paul.
Home |
Main Index |
Thread Index
|
|