The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: External PIR


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: External PIR
  • From: "ben addison" <ben@xxxxxxx>
  • Date: Thu, 20 Nov 2003 21:28:37 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Try using a PIR from timeguard. The link below shows the connections and
as you can see only the Neutral is commend up. They are priced about =A312
inc Vat.=20=20

http://www.timeguard.com/pdf/SLBW2000_Instructs.pdf

Ben Addison
Electrical Contractor
Tel 01924 430767
Mob 07889 845712




-----Original Message-----
From: ukha.jstarkie [mailto:ukha.jstarkie@xxxxxxx]=20
Sent: 20 November 2003 16:25
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] External PIR

Most of the mains PIR's have volt free contacts but if you look they are
wired one side to the live feed in the terminal block. If you find one
that
you like the looks of but isn't wired in this way then wire a 240vac
realy
where the light is normally fed and use the contacts on the relay as
volt
free. I would suggest that is using an additional realay you mount this
inside in a suitable box.=20

-----Original Message-----
From: Simon Brazier [mailto:simon@xxxxxxx]=20
Sent: 20 November 2003 16:02
To: ukha_d@xxxxxxx
Subject: [ukha_d] External PIR

Can anyone point me in the direction of an external PIR unit, that will
work
off mains voltage but will provide a zero voltage opening or closing
contact
when it triggers ?

I'm going to use it to trigger an X10 micromodule to then run a few
events
in Homeseer, but I don't like the normal X10 floodlight with PIR as it's
too
big, and the other X10 PIR unit seems to be for internal use only.

Cheers in advance




UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx=20

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/=20




UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk=20
Post message: ukha_d@xxxxxxx=20
Subscribe:  ukha_d-subscribe@xxxxxxx=20
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx=20
List owner:  ukha_d-owner@xxxxxxx=20

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/=20







Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.