[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Projector Mounting
The noggin method is clearly best if you have no plasterboard up on
the ceiling or are prepared for the major mess removing the ceiling
and then patching it afterwards.
An alternative is to use some (say) 19mm ply and bridge the joists
against the ceiling with this, screw to the joists (a bit of no-nails
glue will help too) and then attach your projector to this board.
Assuming your joists are standard this should need a board no more
than 450-650mm wide. 19mm ply should easily hold a projector of a few
Kgs with little deflection. If you also round off/chamfer the edges,
it will reduce any shadow line and once painted it will be unnoticed
I'll bet.
(It will be strong enough - I've just tested a bit of 19mm ply
700x250 wide chocked up on a couple of bits of 3"x2" with a free
span
of 600mm. Gave a deflection of about 2-3mm with me standing in the
centre and I'm not exactly light!)
Regards
Richard
--- In ukha_d@xxxxxxx, <marc@s...> wrote:
> Hi Julian,
>
> Why yes it does, but that makes the image larger or smaller, it
doesn't move
> it left to right, which is the axis I'm having problems with. I
think I'm
> going to buy some joist hangers and install them in the ceiling
cavity, then
> bolt directly into them.. I think...erm.. ahem.
>
> Marc
> -----Original Message-----
> From: Julian Stuhler [mailto:julian.stuhler@xxxxxxx...]
> Sent: 13 November 2003 21:40
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] Projector Mounting
>
>
> Need ideas please. I have a new projector mount that bolts into
the
> ceiling.
> The problem is, to be in the correct position for the screen
(which
> can't be
> moved) the mount is in between two joists.
>
> Marc,
>
> Obvious I know, but doesn't you projector have a zoom lens to
allow you
> to alter the size of the image? I thought that most projectors
nowadays
> had one...
>
> Regards,
>
> Julian
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
>
>
>
>
> UKHA 2004: 15th and 16th May 2004
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe: ukha_d-subscribe@xxxxxxx
> Unsubscribe: ukha_d-unsubscribe@xxxxxxx
> List owner: ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of
Service.
>
>
> [Non-text portions of this message have been removed]
Home |
Main Index |
Thread Index
|