Re: automated baths

["frostie2001uk" <Neil.Frost@xxxxxxx>]

Not realy been following the thead but does this help in anyway?

http://www.screwfix.com/app/sfd/cat/pro.jsp?id=18732&ts=95065
or
http://tinyurl.com/uyjd

hth
Neil

> > > "Automated filler" = solenoid valve downstream of
a thermostatic
> > > mixer valve (you'd have to pre-set the temperature that you
want
> > > your bath). You could have the temperature specified on a
> > > case-by-case basis but it does get more complex.
> >
> > You would also need to ensure that there were non-return valves
on the hot
> > and cold suplies to the mixer so that when the output was closed
you don't
> > get the possibility of mains pressure cold water backflowing into
the hot
> > water tank...
> >