[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: IR dist blocks
Hi Paul
You can make up your own ir driver similiar to your Kustom
one....Just use a 12v supply on the the transistor side..Thats what i do
with the ir zone splitter....4 IR leds in series with a 68 ohm resistor
across each jack ,so if not used there is still a circuit...an 8 way is
2....4ways in parallel....I will have a look for my schematic and send it
to
you if your interested.....
HTH
Frank
----- Original Message -----
From: "Paul Gale" <groups@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, October 31, 2003 9:17 PM
Subject: [ukha_d] IR dist blocks
I’m running HV with an expansion board. However, I’ve already
used up all
the outputs. Do all the IR dist blocks available work with HV Pro? Any
recommendations for something that will give me 2 to 4 outputs from a
single
input?
Alternatively, can I simply connect two emitters to one HV output as still
get a good strong output?
Paul.
UKHA 2004: 15th and 16th May 2004
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|