[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Clipsal C-bus was Re: **** UKHA2003 - Pictures! ****
- To: <ukha_d@xxxxxxx>
- Subject: RE: Clipsal C-bus was Re: **** UKHA2003 - Pictures!
****
- From: "Dean Barrett" <dean@xxxxxxx>
- Date: Mon, 19 May 2003 09:05:47 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
You do not need them to commission it !!
Assuming you are going to program it yourself, that is sufficient
Dean.
-----Original Message-----
From: Paul Robinson [mailto:ukcueman@xxxxxxx]
Sent: 19 May 2003 00:19
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Clipsal C-bus was Re: **** UKHA2003 - Pictures!
****
> From: "Dave McLaughlin" <dave@xxxxxxx>
> the second is that they will let
> me install it all myself but it has to be commissioned by
> them which is going to make it expensive.
Dave,
I didn't hear anything about this. What's the deal here? Does this apply
even if you go on their course?
Thanks,
Paul
** UKHA2004 BE THERE! ** - start planning now.
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Home |
Main Index |
Thread Index
|