Re: Cat5 cabling

["sh33pdip" <rjl@xxxxxxx>]

Hi Richard,

the flat cable definately exists as my old IT dept used to use it
all the time for making patch cables. The RJ45 crimp tool they had
(and mine now) has cutters specifically for this type of cable and
the ends feed straight into an RJ45 plug.

With regards to the phones I'm going to feed from the master BT
socket into my cat5 cabling and then via a patch panel to the other
cat5 outlets - so I'm geussing this would be secondary adaptors?

Rob

--- In ukha_d@xxxxxxx, <ha@r...> wrote:
> Hello,
>
> 1, I haven't seen flat CAT5, maybe you're thinking of the
telephone cable,
> which you can get from CPC. (CBMOD4 for 4 core)
> 2.
www.wppltd.demon.co.uk/WPP/Wiring/UK_telephone/uk_telephone.html is
a top
> site for  UK telephone wiring.
>
> If I understand right, you've come across those adaptors which
offer 'master
> line' or 'secondary' type. The master ones are for phone systems
that have
> all the extensions wired directly to the incoming BT line (mostly
in
> commercial type installs), and therefore need a 'master' box for
each phone
> outlet. If you already have a master box somewhere in the house and
> extensions then fed from it, then you'll need 'Secondary' adaptors
for the
> extensions.
>
> I don't think there is a definite standard for phone-RJ45 as long
as it
> works in your house, apart from as Mathew said, you can put the 4
cores onto
> the central pins.
>
> I sneaky thing to do is if you are wiring your place for network
and phone,
> put the phones down 4 cores of a CAT5 and network down the other
4. You can
> then split them back out in the wall-boxes, or even do some fancy
RJ45
> wiring to let you use each socket for either/both.
>
> Richard
> www.librasys.com
>
>
> -----Original Message-----
> From: sh33pdip [mailto:rjl@xxxxxxx...]
> Sent: 14 May 2003 17:59
> To: ukha_d@xxxxxxx
> Subject: [ukha_d] Cat5 cabling
>
>
> Still a newbie but I've just done some cat5 cabling of the ground
> floor of my house and have a couple of questions: -
>
> 1 - where can I buy the flat stranded cat5 cable from, and
> 2 - how do I connect the BT master socket to the RJ45 sockets? I've
> found the adapters for phone to RJ45 (but don't quite understand
the
> difference between a master line adapter and a secondary one) but
> not one that has the BT plug on one ens and an RJ45 on the other
(or
> am I just being thick trying to do this?)
>
> Any assistance would be much appreciated,
>
> Rob
>
>
>
>
> ** UKHA2003 BE THERE! Details here:
> http://www.automatedhome.co.uk/article.php3?story_id=1110
**
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/