The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: X10 - firecracker (Xcam2 switching by software)


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: X10 - firecracker (Xcam2 switching by software)
  • From: "Paulo Verissimo" <informat.pv@xxxxxxx>
  • Date: Wed, 14 May 2003 22:21:57 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hello again

Ok... I'll try to do that.


Thanks a lot

PV
Portugal

-----Original Message-----
From: steve.cooper@xxxxxxx [mailto:steve.cooper@xxxxxxx]
Sent: 12 May 2003 11:21
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] X10 - firecracker (Xcam2 switching by software)


The only current option is to either butcher a Robocam controller pad
and
wire it up to the serial port somehow or build one out of a PIC or
similar.
The protocol is available on Dan Houston's site
http://www.laser.com/dhouston/cr14a-rf.htm.

S.




"Paulo

Verissimo"            To:
<ukha_d@xxxxxxx>

<informat.pv@n        cc:

etcabo.pt>            Subject:     [ukha_d] X10 -
firecracker (Xcam2 switching by software)


09/05/2003

23:12

Please respond

to ukha_d








Hello from Portugal

I've several X10 equipment installed in my home, including 2 Xcam2..
I'm trying Xray Vision Software to watch my cameras over my home network
and over the web, and the software works very well, BUT, this software
(like others with the same objective) uses the Fire Cracker (X10
interface PC > power line) the change the active camera.. The problem is
that there isn't Fire Cracker (or something like it) in Europe  (220v)!!
Can anyone help me with this??

Thanks in advance

Paulo Verissimo
Portugal


[Non-text portions of this message have been removed]




** UKHA2003 BE THERE! Details here:
http://www.automatedhome.co.uk/article.php3?story_id=1110
**
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/








________________________________________________________________________
___

The information contained in this message is confidential and may be
legally privileged. If you are not the intended recipient, please do not

read, copy or otherwise use it and do not disclose it to anyone else.
Please notify the sender of the delivery error and then delete the
message from your system.

Any views or opinions expressed in this email are those of the author
only.

Communications will be monitored regularly to improve our service and
for
security and regulatory purposes.

Thank you for your assistance.

________________________________________________________________________
___



** UKHA2003 BE THERE! Details here:
http://www.automatedhome.co.uk/article.php3?story_id=1110
**
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/





Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.