[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: Serial Protocol Capture...
- To: <ukha_d@xxxxxxx>
- Subject: RE: Serial Protocol Capture...
- From: "Dave McLaughlin" <dave@xxxxxxx>
- Date: Sun, 4 May 2003 00:34:04 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi Ian,
Not 100% sure if this will do what you want as it requires some software to
be written, but I use their LPT stuff and it works great.
http://www.entechtaiwan.com/commspy.htm
Regards
Dave...
-----Original Message-----
From: Ian Lowe [mailto:ian@xxxxxxx]
Sent: 04 May 2003 00:27
To: ukha_d@xxxxxxx
Subject: [ukha_d] Serial Protocol Capture...
Hi guys,
I'm sure someone has mentioned this in the past, so asking for info..
I would like to have a look at the conversation which goes on between a
bit
of kit, and a PC application. Ideally, if there was a utility which looked
to the original App like it was a COM port, capturing everything that goes
between the application being analysed and the *real* com port, that would
be perfect.
The manufacturer isn't exactly playing ball.. either they don't actually
know any more what the protocol used was (it's old kit), or they aren't
letting on..
Ian.
[Non-text portions of this message have been removed]
Home |
Main Index |
Thread Index
|