RE: Quick SLIMP3 question

["Michael Mc Aree " <michael.mcaree@xxxxxxx>]

OK Thanks Kevin,

I'll have to have another look at my firewall settings. Maybe one to
many zeros!!

=Many Thanks=

Michael

-----Original Message-----
From: Kevin Hawkins [mailto:lists@xxxxxxx]
Sent: 11 March 2003 11:17
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Quick SLIMP3 question


Just to be clear - the information that Claudio has supplied is to
access a
SliMP3 player (hardware) remotely - meaning that the player would be
located
remotely from the server software. I thought you were wanting to access
the
SliMP3 server from a web browser (remotely), which should work just
using
port 9000 - I just tried this and it works for me using a NAT based
firewall.



Kevin



-----Original Message-----
From: Michael Mc Aree [mailto:michael.mcaree@xxxxxxx]
Sent: 11 March 2003 08:54
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Quick SLIMP3 question



Kevin - I can access FTP, PC Anywhere, Web site etc all through my
firewall/router, but not SLIMP3 - I will give the ideas Claude suggested
a go.

Many thanks

Michael

-----Original Message-----
From: Kevin Hawkins [mailto:lists@xxxxxxx]
Sent: 10 March 2003 23:59
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Quick SLIMP3 question


No - you should be able to access the SliMP3 server externally like
this.

Can you access it internally from another machine on your home network -
or
if you don't have one can you access it as  http://192.168.1.1:9000
<http://192.168.1.1:9000/> 
replacing the ip address with the ip address
of
your machine ?  Is this the first service that you have tried to access
externally - for example have you ever tried to run a web server on your
PC
?

BTW you must access and map the address of the server not the actual
player
(just in case you were trying to do otherwise). Not sure if you have a
NAT
firewall or how your addresses are exposed to the internet.



Kevin



-----Original Message-----
From: Michael Mc Aree [mailto:michael.mcaree@xxxxxxx]
Sent: 10 March 2003 16:04
To: ukha_d@xxxxxxx
Subject: [ukha_d] Quick SLIMP3 question




Just got it today. A big thank you first of all to Ken Watt for all his
hard work!! THANKS!
I have opened a port on my firewall and mapped it to the SLIMP3 port
9000 but I can't see anything from the outside world. Is this normal??

Regards

Michael