RE: Query on wiring and Cbus

["Des Gibbons" <des@xxxxxxx>]

Hi Frank,


>         The 8 channel dimmer that i used each channel is rated at
> 1 amp so a
> max of 8Amp per dimmer module.... How may light points are you putting
on
> each floor  + how may dimmer modules ?? What sort of wattage per light
??

8 channels on each floor is what I was thinking of, I should just about
manage it. The biggest load would be the lounge which has 8 x 35w 12v bulbs
on  210va and 150va trannies. So if the dimmer has a max load of 8 amps, I
better go work out what I can send up 2 x 1mm T&E :)

>
> > All the switches are being homeruun to a different location
> anyway, so it
> is
> > only the power cables to each fitting.
>
> You could have daisy chained the switches if you wished??

After seeing the prices of the switches, I've decided to do it a different
way, hurry up with that xAP-cbus connector Kevin ;)

>
>
> > Oh, and do the wiring regs say anything about doing it this way?
>
> Sorry dont know UK Regs

Not too far from my knowledge of them then ;)

Cheers, Des.


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/