The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Help with Wireless Internet on Ipaq


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Help with Wireless Internet on Ipaq
  • From: "Steve Lowe" <splowe@xxxxxxx>
  • Date: Tue, 25 Feb 2003 09:02:06 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi Dan

Thanks, I checked my settings, for some reason the proxy browser box was
checked, unchecked it and now all is OK.

Thanks,

Steve.


-----Original Message-----
From: Dan [mailto:dtoma@xxxxxxx]
Sent: Friday 21 February 2003 14:46
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Help with Wireless Internet on Ipaq


Hi,

If you can Active syunc through WLAN then you're done.
You just need to configure on the iPaq the network connection as Work.

Go to Start>Settings>Connections>Connections
In the "My network card connects to" field choose
"Work"

ActiveSync starting with version 3.5 can do a pass-through connection to
the
internet.
All you need is that the PC you sync with top be connected to the internet.

Best regards,
Dan
P.S. If you need further informations drop me a mail. You can connect to
the
Internet without Active Sync too.

----- Original Message -----
From: "Steve Lowe" <splowe@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Friday, February 21, 2003 3:41 PM
Subject: [ukha_d] Help with Wireless Internet on Ipaq


> Hi,
>
> A few weeks ago I replaced / upgraded my home network from twisted
> pair to wireless 802.11b
>
> My 2 pcs and my laptop all see each other and after installing a Diva
> Lan Modem from Ebay all 3 machines can access the net on demand
> simultaneously. (Surfing via the wireless card in the laptop, whilst
> sitting in the lounge with no wire is great).
>
> Now coming to the Ipaq, which has a Dlink DCF-660W CF Wireless card in
> it.
>
> I can sync via ActiveSync over the network no problem.
>
> What I can't do is figure out how to get Internet Explorer or email on
> the Ipaq via the Lan Modem.
>
> The Lan Modem has a IP address of 192.168.xxx.x
>
> How do I get the Ipaq to use this address in Pocket IE and mail
> services.
>
> If someone can give me a step by step way of setting this up I would
> me extremely grateful.
>
> The Ipaq by the way is a 3630 and is NOT running PocketPC 2002
>
> Thanks for reading.
>
>
> Regards,
>
> Steve Lowe.
>
>
>
> - Steve Lowe
> - E-Mail : NO.SPAM.splowe@xxxxxxx
> -          Before Replying Remove .NO.SPAM
> - UK Resident although my e-mail address is usa.net
>
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.