RE: OTish - Digital Wireless Phones

["Stephen Jones" <stephen.jones@xxxxxxx>]

Tony

Well, my phone is a Philips Onis 2 handset, so may not be the same as
yours. There's a couple of small plastic tabs at the sides (one of which
broke off), and there's a small torx screw behind the batteries. I
didn't have a small enough bit for it either, so I used an old
jeweller's screwdriver which had the sides worn off. Try any old flat or
Philips screwdrivers you have - one should fit well enough to get it
out.

HTH

SJ

-----Original Message-----
From: Tony Butler [mailto:lists@xxxxxxx]
Sent: 08 June 2003 13:35
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] OTish - Digital Wireless Phones

Steve,

How did you get the bloody things apart?  My T1 is no good.  What size
bit do I need?

Cheers,

Tony

> -----Original Message-----
> From: Stephen Jones [mailto:stephen.jones@xxxxxxx]
> Sent: 06 June 2003 01:06
> To: ukha_d@xxxxxxx
> Subject: RE: [ukha_d] OTish - Digital Wireless Phones
>
>
> Tony
>
> AFAIR it wasn't just damp, but quite sticky. Appears to be a
> common problem with these phones, given that my father has
> the same phone and the exact same problem. Just wipe the
> board carefully with a damp cloth, and wash the membrane with
> soapy water. As long as water is kept to a minimum when
> cleaning the board, there shouldn't be any problem. But
> nothing special is needed to clean it.
>
> HTH
>
> Steve