The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: X10 Light Switches


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Re: MV1000 Help


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Re: MV1000 Help
  • From: "David Claxton" <UKHA@xxxxxxx>
  • Date: Mon, 2 Jun 2003 15:46:55 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

If you buy a phono to bnc adaptor you can hook up your MV1000 to a video
source (video, dvd, etc). Good way of testing it if you are waiting for
your
cameras to arrive or are unsure of what cameras to get.


-----Original Message-----
From: John Nye [mailto:john@xxxxxxx]
Sent: 02 June 2003 14:00
To: ukha_d@xxxxxxx
Subject: Re: [ukha_d] Re: MV1000 Help


I have a couple of the response cameras, but as others have discovered they
do not work (have read through previous post about trying resistors across
pins on the scart & amplifying the camera  - but have to admit I would
not
know where to start!)

So I ordered a couple  of the 527L's from Henrys - hopefully should be here
in the next couple of days so that I can have a real play (reading the
manual is so boring:).

John
----- Original Message -----
From: Kenneth Watt
To: ukha_d@xxxxxxx
Sent: Monday, June 02, 2003 1:38 PM
Subject: RE: [ukha_d] Re: MV1000 Help


> Think so - see 1.3.1 in the manual (needs a valid & active video
source
to
> browse). I have the same problem as waiting for the cameras to arrive.

John what cameras did you order as it refuses to see mine. :/

K.



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.