The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Alarm systems


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Clipsal CBUS wiring question



Yes. You just can't create closed loops. So you can daisy chain and home
run
or any mixture thereof.

Quoting directly from the CBus training manual v2.3.0:


<------Start quote----------------->
Units are connected together in "daisy chain" or "star"
connection or a
combination of both.

When talking of star and daisy chain connections, it should be noted that
the physical nature
of the connection (topology) is in fact being referenced to.

<snip a couple of diagrams>

It can be seen that in both star and daisy chain configurations the C-Bus
connections are still +ve to +ve and -ve to -ve. In other words a parallel
connection
is maintained but in the case of the star connected example (fig 1.3) the
'star point'
is located on the top unit. In this case all the cables run out from this
unit to other
units located at various locations.

There is a recommended maximum number of cables that may be placed in one
CBus
terminal. Various rules may be found in the 'Introduction to C-Bus Training
Manual'. This manual should be read and fully understood before further and
more
difficult tasks are undertaken.

"Closed loops" are not recommended and should not be used.
<------end quote----------------->

You can get this from http://www.clipsal.com/cis/literature.php3
and follow
the link for "Installation and training...Training Manuals"

Paul

----- Original Message -----
From: "Mick Furlong" <hiltoneltd@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Thursday, May 22, 2003 10:28 PM
Subject: [ukha_d] Clipsal CBUS wiring question


> Quick question before I get back to pulling cable;)
>
> The Cat 5 wiring system is based on a bus (daisy chain type system) ,
is
it
> allowed to have spurs of off this chain?
>
> Cheers
> Mick
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
> ** UKHA2004 BE THERE! ** - start planning now.
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.