The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Replacing a Switched Spur with an X10 AW10


  • To: ukha_d@xxxxxxx
  • Subject: Replacing a Switched Spur with an X10 AW10
  • From: "david_dabs" <david_dabs@xxxxxxx>
  • Date: Fri, 20 Jun 2003 09:19:01 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

I wonder if anyone has done this or similar?

I currently have a switch spur in the kitchen that powers 3 short
(2ft) florescent tubes and two 12v tranformers for powering 4x (2 per
transformer) low voltage lights for the glass doored cupboards, what
I'd like to do is replace this switch with the appliance switch
module AW10.  The spec of this module is 10A resistive load - 3A
inductive, I guess all of these devices are inductive, but have no
idea on the rating of a florescent tube.




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.