RE: CM11A Problem Solved

["Stainton-James, Mark (London)" <stainmar@xxxxxxx>]

The builders had been moving some electrics in the Kitchen, which is on
the
same circuit. I went through each of the JB's and sockets that they had
touched, until I found an earth that was touching the metal box and had
not
been shielded at all.  For mr sorting this out seemed to fix the
problem.  

At least since doing this on Saturday everything has been working 100%
reliably, no lockups no 'lost' x10 etc etc

-----Original Message-----
From: Pedro de Oliveira [mailto:p.oliveira@xxxxxxx] 
Sent: 14 January 2003 10:11
To: 'ukha_d@xxxxxxx'
Subject: RE: [ukha_d] CM11A Problem Solved


Mark,

If you fixed it, how did you do it?

Cheers
Pedro

> -----Original Message-----
> From: Stainton-James, Mark (London) 
> [mailto:stainmar@xxxxxxx]
>
> Anyway the problem turned out to be a 'small earth leak' on the 
> circuit the CM11A was on. The 'leak' was not enough to cause trip the
> mains but evidently enough to cause X10 problems.

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/





http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.