The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: RE: Re: Internet car radio (slightly OT)


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: XBox - was Windows XP Media Center Edition Review


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: XBox - was Windows XP Media Center Edition Review
  • From: "Des Gibbons" <des@xxxxxxx>
  • Date: Sat, 11 Jan 2003 11:28:46 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx




>   Which type/version/cost of modchip are you using Des?

It depends on your soldering, if you are crap, use the Matrix, if you are
average, go for the cheapmod or X2:lite pin header, If you are really good
at soldering, or are on a budget, go for a 29 wire homebrew.

I have all of the above, apart from the Matrix.

Costs :- (without installation)

Homebrew, 29 lengths of wire and an eeprom.
Cheapmod, about ?15
X2:Lite, about ?30
Matrix, not sure.
>
>   I saw onw recently (on a web vid) that doesn't require
> soldering, it just
> bolts (literally) onto the motherboard, if you've done it right an led
> lights up green, otherwise it lights up red and you have to reseat the
> board.

That is the Matrix, personally I wouldn't touch it, but if you can't solder,
it is your best option.

Cheers, Des.



Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.