Re: Re: New Comfort has arrived - no paperwork/manuals? now Wiring help required!

["Alancc" <alan.cc@xxxxxxx>]

Strip the sheath and foil back to where they come into the panel, join
all
the drain wires together as close as possible to the point of entry and
earth with the minimum length of 1mm earth wire. Join all the unused
cores
together and earth these keeping them and your 1mm earth wire away from
the
PCB.

Alancc
----- Original Message -----
From: <thomas.dubourg@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Thursday, January 09, 2003 8:37 AM
Subject: [ukha_d] Re: New Comfort has arrived - no paperwork/manuals?
now
Wiring help required!


> Phil from Lets Automate has got in touch with me and manuals
should
> have been included. He is sending them to me today!
>
> I'll be ready to start installation at the weekend....
>
> Can anyone give me some advice on neatly wiring comfort? I have
used
> 8 core screened cables throughout the installation and there will
be
> 16 zone cables entering the case.
>
> Should the outer protective sheath on the cable be stripped back
to
> where the cables enter the top of the Comfort case?
>
> For some of the cables I will only be using 4 of the 8 cores, how
> should I manage the spare 4 cores within the CPU units so that
they
> can be connected at a later time?
>
> What about cablel labelling? - I have used the infamous colour
coded
> insualtion tape system on the outer protective sheath of each cable
-
> but this could be a bit awkward if the outer protective sheath is
> removed.
>
> Thanks for any advice!
>
> Tom





http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.