Re: TV distribution

["tomdubourg <thomas.dubourg@xxxxxxx>" <thomas.dubourg@xxxxxxx>]

Hi Malcolm

The two RF outputs on the back of your Panasonic Sky Box are provided 
for :

1) To connect to the RF socket on the back of your main telly
2) To feed a TV distribution system so that you can watch SKY around 
the house. There is also a voltage present on this connector (when 
enabled from the Sky engineer menus) so that you can use the "Remote
Eye" to change Sky channels from other rooms.

Socket 2) should be used to feed the Sky signal to your Amp for 
distribution to other tellies. 

Cheers

Tom





--- In ukha_d@xxxxxxx, "Malcolm Surgenor" <malcolm@s...>
wrote:
> i've noticed there are two RF outs on the back of the Panasonic. It
makes no
> difference which one i use but why two??
> 
> Malcolm
>   -----Original Message-----
>   From: Robert Chasmer [mailto:robert.chasmer@m...]
>   Sent: 07 January 2003 14:07
>   To: 'ukha_d@xxxxxxx'
>   Subject: RE: [ukha_d] TV distribution
> 
> 
>   Malcolm Surgenor [mailto:malcolm@s...] wrote:
>   > My set up to distribute TV around the various TV's in
the house 
is
>   > as per the diagram at the top of page 22 of the
Maxview 
catalogue
>   > http://www.maxview.ltd.uk/Download/Broadcast%20Guide.pdf. 
I 
have just
>   > recently replaced the old ITV digital set top box
with a Sky 
box. The
>   > terrestrial picture quality is great on all TV's but
other than 
on the
>   > master I just cannot get a good quality Sky picture
on any of 
the
>   > slave TVs (it's grainy).  Have I done something
wrong can 
anyone see?
> 
>   It might be that the RF frequency your SKY box is using is
conflicting
> with
>   another channel.  Are you using the same RF frequency
your ITV 
Digital box
>   used to use.  Keiths taboo channel searcher may be of
use also:
>   http://www.kat5.tv/taboo.html
> 
>   I am assuming that the Sky box is connected to your main
TV via 
Scart
> which
>   is why the picture is fine there.  If not I'm not
sure why your 
main TV is
>   the only one that has good picture, unless this is the one
with 
the
> shortest
>   cable runs.
> 
>   To change the RF output of a Pace sky digibox you need to
get 
into the
>   installer menu (From Memory):-
>   * Go to Services
>   * Select System Setup (Option 4) I think
>   * Key in 0, 1, Select
> 
>   You should now be at the installer menu, BE
CAREFULL!!!
> 
>   After you change the RF frequency of the Sky Digi box, you
need 
to retune
>   the sky channel on the TVs.  You need to use a spare
channel.
> 
> 
>   Rob
> 
>   --
>        ______  
__   _   ______   ______
>       / ___   / /  /  /
__    / _____ HOME: chas@xxxxxxx
>      / /  /_/ / /__/ / / /__/ / /
/__    http://www.kaosuk.co.uk/
>     / /  __  / ___  / / ___ 
/  \__ 
\           
----
>   / /__/ / / /  / / / /  / / _____/ / Rob Chasmer,
MMT Computing
>   ______/ _/  /_/ _/  /_/ ______/
robert.chasmer@xxxxxxx
> 
>   This email and any files transmitted with it are
confidential and 
intended
>   solely for the use of the individual or entity to whom
they are 
addressed.
>   If you have received this email in error please let us
know by e-
mail
> reply
>   and delete it from your system; you may not copy this
message or 
disclose
>   its contents to anyone.  Please note that any views
or opinions 
presented
> in
>   this email are solely those of the author and do not
necessarily 
represent
>   those of MMT Computing plc.  Finally, the recipient
should check 
this
> email
>   and any attachments for the presence of viruses.  MMT
Computing 
plc
> accepts
>   no liability for any damage caused by any virus
transmitted by 
this email.
> 
>         Yahoo! Groups
Sponsor
>              
ADVERTISEMENT
> 
> 
> 
> 
>   http://www.automatedhome.co.uk
>   Post message: ukha_d@xxxxxxx
>   Subscribe:  ukha_d-subscribe@xxxxxxx
>   Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
>   List owner:  ukha_d-owner@xxxxxxx
> 
>   List of UKHA Groups here - 
http://groups.yahoo.com/group/UKHA_Grouplists/
> 
>   Your use of Yahoo! Groups is subject to the Yahoo! Terms
of 
Service.
> 
> 
> [Non-text portions of this message have been removed]

Yahoo! Groups Sponsor

ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx 
Subscribe:  ukha_d-subscribe@xxxxxxx 
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx 
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.