The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Bar Code scanner


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Color Kinetic Failures


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Color Kinetic Failures
  • From: "Ian Davidson" <ian@xxxxxxx>
  • Date: Mon, 6 Jan 2003 20:38:54 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Hi Tony

The most common fault with the lights is a SM Capacitor on the underside
of the top board. It goes s/c and blows a SM fuse on the same board. You
need to separate the boards to get to it. Make sure you replace the fuse
with the correct value, if not and you still have a s/c then you will
have a different sort of light display.....

Mainly orangey yellow with a fast flicker closely followed by grey to
black smoke emanating from the rear of the unit.

Here speaks a voice of experience!!!

If you do have any problems either email me off list or let me have the
unit & I should be able to fix it for you.


Ian D


-----Original Message-----
From: Bricknell, Tony [mailto:tony.bricknell@xxxxxxx]
Sent: 06 January 2003 16:17
To: ukha_d@xxxxxxx Subject: [ukha_d] Color Kinetic Failures

Well it was only a matter of time...

Recently installed one of my three power supply "bricks" from Ian.
Worked
fine for seven days, six hours use a day (on a timer).  Then it's
internal
fuse blew :o(   Cautiously replaced fuse (after all, the switching on
and
off may have aged the fuse <g> ), attached power supply to a safety
isolating transformer, threw switch and ... BANG!  Fuse #2 blew.  A bit
of
digging around the circuit shows that switching MOSFET Q1 is
short-circuit
between all it's pins!!  New one on order from Farnell....

And then last night one of the three cove lights in use died at power up
-
no lights, no nothing.  Just dark silence (from that annoying whine they
make) :o(  If I get a chance I'll be stripping it down over the next few
days to see what's upset it.

Just as well I ordered more than I needed :o)





Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.