The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: Color Kinetic Failures



GHgsc> I've not been running mine very much at all, but I do have one minor
GHgsc> problem that has been there from day 1. I have 4 lights running off
GHgsc> two power supplies. I have the lights in a row, all on the
GHgsc> same 'prgoram' which is a fade through the spectrum over the period
GHgsc> of a minute. Three of the lights are in perfect synch, but the other
GHgsc> one appears to run slightly faster/slower (can't remember which)
GHgsc> resulting in it changing colours at different times.

Assuming that all the DIP switches are set to be exactly the same,
then it sounds as though one of the switches on the dodgy unit might
be broken - probably one of the less significant ones.  You could try
tweaking the other units accordingly.

--
Best regards,
Rob                            mailto:rob@xxxxxxx

Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.