The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IR distribution



Have a look at the IR distribution kit at www.keene.co.uk I have used this<= BR> and it works great, a lot cheaper than Xantech. If you use the stick on
emitters they still allow the window to receive other signals, also if you<= BR> have a rack of kit you can use just one high output emitter to flood the lot.

Alancc
----- Original Message -----
From: Brian G. Reynolds <brian.g.reynolds@xxxxxxx>
To: Ukha_D (E-mail) <ukha_d@xxxxxxx>
Sent: Monday, December 30, 2002 9:05 PM
Subject: [ukha_d] IR distribution


Okay, I am going to "bite-the-bullet" and buy some Xantech stuff.= ....

I think I need the following..
791-44 IR Splitter/Amplifier Qty 1 =A3 77.23
490-00 Micro Link Receiver Qty at least 1 =A3 88.13

283M Single Blink Emitter Qty 1 per AV piece of equipment =A311.75
or
286M Double Blink Emitter Half as many as Single Blink? =A316.45

Total =A3181 min!
yikes!!!!

I think the IR emitters could be bought from, err, Maplins and soldered ont= o
CAT5e? and the end connectors 1.5mm? also soldered on for connection into the Splitter/Amplifier.
At the moment I seem to be living in the loft with all my kit rack mounted<= BR> and I am using a Pronto to control the kit. What I am thinking about is, if=
I use stick on emitters I assume they cover the whole of the IR window
therefore stopping the Pronto from working?
I know someone is going to say "if you can control everything from a P= ronto
why fit Xantech stuff?" Easy answer, I do not intend to live up here indefinitely! I also have my meals in the kitchen and dining room and would=
like to be able to control what I watch there, not to mention the living room when I eventually move back downstairs
Does anyone have any suggestions or am I on the right track?
Thanks all,
B.





Yahoo! Groups Spons= or
ADVERTISEMENT
3D""=
3D""

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

  • References:
Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.