The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Re: Building Node0


  • To: <ukha_d@xxxxxxx>
  • Subject: Re: Re: Building Node0
  • From: "Andy Laurence" <andy@xxxxxxx>
  • Date: Sun, 29 Dec 2002 12:26:06 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • References: <000301c2ade6$4309bc30$0200a8c0@bt922268>
  • Reply-to: ukha_d@xxxxxxx

From: "Keith Doxey" <ukha@xxxxxxx>
> With regard to your plan of doubling up on runs *IF* you have enough
cable.
<snip>

I no longer have the option of running more cable at a later date.  I shall
be running the following....

Lounge:
2x coax
6x CAT5

Kitchen:
2x coax
4x CAT5

Bedrooms:
1x coax
4x CAT5

In addition, I shall coil up 10 CAT5 and 2 coax runs in the basement.  If I
do run out of cable in the future, I can run these to the lounge, kitchen or
bathroom.  Future runs to the bedrooms will invlove running down walls and a
job for the plasterer.  Does this sound a better solution?

Andy


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.