The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Thermostat with RS232


  • To: <ukha_d@xxxxxxx>
  • Subject: Re: Thermostat with RS232
  • From: "Paul Robinson" <ukcueman@xxxxxxx>
  • Date: Tue, 25 Feb 2003 23:11:53 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • References: <004d01c2dcf1$dd6d1da0$bd3ab9a8@xxxxxxx>
  • Reply-to: ukha_d@xxxxxxx

Julian,

> Shame about the ASCII art - took me ages ;-)
Thanks for trying though!

> The control unit is powered by a single 12vDC power supply. This is
used
> to power the thermostat, the control unit electronics and the on-board
> relays...
Yes. I understand that.

> ...that provide the 24vAC output when the heating is activated.
This is the bit that's confusing me. What generates the 24vAC?

Paul


__________________________________________________
Do You Yahoo!?
Everything you'll ever need on one web page
>from
http://uk.my.yahoo.com


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.