The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RE: Quickies .. pulling cable.


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: RE: Quickies .. pulling cable.
  • From: "Phil Harris" <phil@xxxxxxx>
  • Date: Mon, 10 Feb 2003 20:14:23 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


> Does everyone have smaller drills than me ? I had to chop out of
> the top of
> the joist because my drill wouldn't fit in-between the joists !

Ideally use a right angle drill ... they're not cheap but bloody usefull in
tight spaces!

> If your paranoid then you can always screw a metal strap across the cut
> out for strength.

Actually it's the *BOTTOM* of the joist that is in tension, the top is in
compression. If you put a metal plate over a notch then it will protect the
cables or pipes from having a nail put through them.

Phil


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.