The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problems installing Xpl



John
I have had the same problem not being able to select the com port...
I think the fix was removing all  copies of xpl.ocx file and downoading the
latest version of tonys devcom.....

BTW..........Congratulations on getting native xpl support on the slim
devices ......

Frank

----- Original Message -----
From: <email@xxxxxxx>
To: <ukha_d@xxxxxxx>
Sent: Monday, December 22, 2003 5:02 AM
Subject: [ukha_d] Problems installing Xpl


> Hi,
>
> How do I go about getting help with xPL?
> Checked the web site but not much there and a very inactive forum with
> only 3 posts so thought I'd try asking here.
>
> I'm totally new to xPL and haven't been following any of the threads
but
> thought I'd install it tonight and play about with my x10 and SLiMP3
but
> fell at the 2nd hurdle.
>
> Win2K Server with .Net previously installed.
> Followed instructions from the web page : HowTo: Control your X10
> devices using xPLHal
> Installed xPLHal Service, confirmed the service was running ok and
> configured it as per instructions giving it a newconf name of Server1.
>
> Installed the xPL-to-CM12 gateway service and insured the service was
> running (set to automatically start but had to manually start it after
> install).
> Checked under Awaiting Configuration and there it was...
> Gave it a newconf name of Server1 but there is no comport variable to
> set a value against!
> i.e. comport does not appear in the list of configurable items.
> I OK'ed it anyway and it moved from Awaiting config to the xPL Devices
> list.
>
> I tried uninstalling the CM12 Gateway and reinstalling it but it
> immediately appeared in the configured xPL Devices list again with the
> previous config and comport still missing.
> Uninstalled both the CM12 Gateway & xPLHAL, deleted the XPL folder
in
> Programs folder and reinstalled again.
> Again the XPLHAL & CM12 devices immediately appeared under the
> configured devices with the previously entered names of Server1 and
> again the comport value missing.
>
> I reckon the values must be held in the registry somewhere - anyone
know
> where, or how I go about totally uninstalling these so I can try again
> from scratch??
> Or is there something obvious I'm doing wrong??
>
> Cheers,
>
> Anthony.
>
>
>
> [Non-text portions of this message have been removed]
>
>
> UKHA 2004: 15th and 16th May 2004
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx
> Subscribe:  ukha_d-subscribe@xxxxxxx
> Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
> List owner:  ukha_d-owner@xxxxxxx
>
> Yahoo! Groups Links
>
> To visit your group on the web, go to:
>  http://groups.yahoo.com/group/ukha_d/
>
> To unsubscribe from this group, send an email to:
>  ukha_d-unsubscribe@xxxxxxx
>
> Your use of Yahoo! Groups is subject to:
>  http://docs.yahoo.com/info/terms/
>
>
>


UKHA 2004: 15th and 16th May 2004

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.