[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: DLT drive with Win2K
- To: <ukha_d@xxxxxxx>
- Subject: RE: DLT drive with Win2K
- From: "David Millard" <david@xxxxxxx>
- Date: Sun, 14 Dec 2003 00:09:05 +1300
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
The DLT tape drive can be used with Microsoft backup which is part of
Win 2K or otherwise you would need to look at commercial software such
as Backup Exec or Brightstor ( aka Arcserve ) to store to tape it will
not appear as a drive in my computer
David
david@xxxxxxx
-----Original Message-----
From: Nigel Giddings [mailto:nigel.giddings@xxxxxxx]
Sent: Saturday, 13 December 2003 11:41 p.m.
To: ukha_d@xxxxxxx
Subject: [ukha_d] DLT drive with Win2K
Hope this is not seen as OT.
I am configuring a machine for use with Homeseer. It's actually a Compaq
Proliant 6500. I've loaded Win2K and all seems fine except no sign of
the DLT.. It has 3x4.3Gb drives configured as RAID 5 and a CD-Rom (all
SCSI). This was done with Smart Start.
I've checked in 'Hardware Devices' and it's there (ID6 on the SCSI), but
how do I use it ? I expected it to appear as a Drive in 'My Computer'. I
intend to use it to store images of various PCs (Norton Ghost?) and the
back-ups of some data.
I'm not sure if I need to use Smart Start to set this up properly, It
wasn't me who used Smart Start to do the initial Config... and I've
never used SS...
Any good links ?
Thanks in advance, Nigel
Home |
Main Index |
Thread Index
|