[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: VPN Question
- To: <ukha_d@xxxxxxx>
- Subject: RE: VPN Question
- From: "Hawes,Timothy Edward (GEG)" <haweste@xxxxxxx>
- Date: Fri, 12 Dec 2003 14:57:57 -0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Paul,
Not sure if it helps, but when I connect from home (via dialup) I also
couldn't see my networked LaserJet. I have to give my laptop a fixed IP and
add a new port with the printer's IP address e.g. port was named
IP_200.200.200.9.
Our corporate network assigns IP addresses via DHCP so I assume I could
create a discontinuity between my connection over the corporate WAN and my
own LAN with the printer.
Even though you can't "see" your other computers on your own LAN,
you may find you can still connect to them via pcAnywhere (something about
being in the same domain ?).
Dunno if that helps you but it worked for me :-)
Cheers,
Tim.
> -----Original Message-----
> From: paul_watkin Sent: 12 December 2003 14:45
>
> I have a question relating to VPN setups.
>
> On my laptop I have Nortel Contivity Access client so I can work from
> home, the laptop connects to the internet using my home network which
> now has a HP PSC2510 network printer scanner etc attached to it.
>
> The printer is excellent, however there is one slight problem in that
> when I am connected to the VPN I cannot see the printer or any
> computers on my network.
>
> So the question is:- Is it possible to connect to both the VPN and my
> internal network at the same time (before anyone mentions security
> this is all sat behind a Mitel SME Gateway server)??
>
> The alternative is to use USB to connect to the printer but I was
> hoping to put the laptop in node zero and use a Belkin KVM extender
> to acces it.
>
> Paul
+
Home |
Main Index |
Thread Index
|