The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Wiring question...



Hi chaps,

I _know_ this has been asked and answered here before, and I _should_ find
it in the archive, _but_ it's 9 o'clock at night, I only have another hour
or so to work, and I have the wires and the faceplate in my hands and want
to finish it asap....

So here goes.... Is there (and if so what is it), a convention for which
CAT5 cores to use on a BT socket? - and before you ask why I'm not just
terminating to an RJ45 socket and using an adapter, it's because it is to a
"Multi-Service Wallplate" that's part of the loftbox setup. -
This has a
pair of normal BT sockets provided as standard, and naturally I have only
run CAT5 cable to the backbox...

So which cores should I punch to which terminal(s) on the BT socket?

One for Keith perhaps?... :-)

TIA

Paul G.

_________________________________________________________________
Stay in touch with absent friends - get MSN Messenger
http://www.msn.co.uk/messenger



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.