The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Re: Re: Robots


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Power over Ethernet


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Power over Ethernet
  • From: "Andy Laurence" <andy@xxxxxxx>
  • Date: Fri, 5 Dec 2003 10:44:21 -0000
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

From: Rob Mouser [mailto:rob@xxxxxxx]
> Would this also work with a network camera? Such as the Axis 205 which
was
> discussed on the group? (We now have one of these on our internal
network
> here in the office, FANTASTIC!)

It will work with any ethernet device that consumes power that is within
spec of CAT5 cable.  Most small devices (such as WAPs, cameras, etc.) are
within this spec.

Cheers,
Andy
--
http://ha.andylaurence.co.uk
http://projects.andylaurence.co.uk


Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.