[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: [ukha_d] [OT] Another cheap SDS+ drill (£50)
- To: <ukha_d@xxxxxxx>
- Subject: RE: [ukha_d] [OT] Another cheap SDS+ drill (£50)
- From: "Stephen Jones" <ukha@xxxxxxx>
- Date: Wed, 27 Aug 2003 10:01:06 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Yep, it has 3 settings [1] Drill [2] drill & hammer [3] hammer only.
The
plastic case looks and feels fairly cheap but for the money it's a
fairly good buy (IMO), given it's 900w and comes with a chuck attachment
and 5 or 6 SDS bits.
SJ
-----Original Message-----
From: Neil Ball [mailto:neilball@xxxxxxx]=20
Sent: 27 August 2003 09:35
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] [OT] Another cheap SDS+ drill (=A350)
Check it's got a rotostop so you can have the hammer action without
rotation, otherwise the chisel/box sinker is going to be at best a
little
difficult to use or at worst a disintegrating high speed projectile!!
<snip>
=20
it doesn=92t actually state that it=92s a SDS+ drill, but going by the
picture
on the paper flyer (not the pictures on the web-site), it takes SDS
bits,
and as it states that it=92s suitable for chiseling, then I presume it=92s
an
SDS+.
=20
<snip>
Home |
Main Index |
Thread Index
|