[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: X10 Alarm system SC2800
- To: <ukha_d@xxxxxxx>
- Subject: RE: X10 Alarm system SC2800
- From: <mrf@xxxxxxx>
- Date: Fri, 22 Aug 2003 08:55:46 +0100
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
Hi John,
Thanks for the reply ! Very informative, but I have one more question with
regards to this bit :
> Can other devices, e.g Homeseer, see the PIR's trigger ?. Do the PIR's
usea
> Kinda, it has several, one code to say it is armed, one to say an
alarm is
> triggered, one for an external siren etc. Two codes for lifestyle
functions.
So, you can't use the PIR's as occupancy sensors ? You see, I would like to
have Homeseer to be able to see if an individual PIR is triggered with or
without the alarm set. So, for example, if the alarm is not set, but
someone
walks in front of one of the PIR's, I can see that one has triggered on the
Homeseer web page.
Don't suppose you know of an online manual for it ? perhaps covering the
programming ?
Really appreciate your time.
Cheers
Marc
Home |
Main Index |
Thread Index
|