RE: Mv1000 cont...

["Paul Smith" <wheelbarrowhandle@xxxxxxx>]

Hi Brian,


Do you get any errors in the serial output from the MV1000.


If you use something like HyperTerminal and switch on text capture. Boot
the
MV1000 it will log all the info. Stop the capture and then e-mail me the
file I'll have a look at it and see if there is anyone different to mine.


Regards,

Paul


-----Original Message-----
From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
Sent: 19 August 2003 21:23
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Mv1000 cont...

Hi Steve, I can not access them at all tonight!....

I have re-booted the Mv1000 and just re-booted my server but nothing.....

I still feel that the accessing the cameras is a problem with ISA server
but
as to the B&W I aint got a clue..

I think I will load all the defaults to the Mv1000 and try again.

Is there any BIOS upgrades or the likes to be done on these boxes?

Thanks also to John for his help, I will go away and sulk then try again.

B.

-----Original Message-----
From: Steve Morgan [mailto:steve@xxxxxxx]
Sent: 19 August 2003 21:09
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Mv1000 cont...


> -----Original Message-----
> From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
<snip>
>
> So now, what is wrong?

It's either config or a duff MV1000, by the sounds of it.

> Can any users tell me if they own a one of these cameras..
> http://www.henrys.demon.co.uk/cctv/527l.htm
> and have it connecting to a Mv1000 and have a colour display?

Yeah, works just fine for me.

> Apart from this non colour issue the cameras seem great..
> They work brilliantly at night with the built in IR emitters.

As I mentioned previously, I have a problem with IR reflecting back from
the front of the camera causing a 'halo' effect at night, which I'm not
best pleased about. Paul Smith had the same problem. I e-mailed Henry's
about it and here's the reply:

------------>>>------------------
>I recently purchased a 527L Outside Colour IR Camera. I and another
>user
>have noticed that, at night, the image has a significant 'halo' effect
>which I assume to be IR reflection from the glass in front of the lens
>which severely reduces image quality. Are you aware of this problem and
is
>there anything that can be done about it? I have attached an example
image
>captured from the camera that illustrates the effect.
>
>Regards,
>>Steve Morgan

Hi Steve,

Yes we know about it....AV Tech are trying to come up with a solution.
Its caused by the IR LEDS being seen a by the Camera. We have another
Model
that is OK.
Its the COL10/25IR

See http://www.cctv-centre.co.uk/cctv/col1025ir.htm

If you wish to pay the difference and upgrade to the Col10?25IR, please
return the 527L with a Letter.
-----------<<<--------------------

Steve




** UKHA2004 BE THERE! ** - start planning now.

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/