RE: Mv1000....new cameras

["Brian G. Reynolds" <brian.g.reynolds@xxxxxxx>]

Thanks Steve,

I have spent a lot of time in the admin area, it does see all three cameras
in the drop down box but only displays 1 at a time and if I select another
camera.....nowt...

I have connected the cameras into the extension leads supplied and fitted a
phono to BNC connector from Maplins into the T piece with the supplied
terminators on the other end of the T piece.

I assume this is correct as in the days of yore with the LAN's.

I will go and try the re-detect and see what happens.

B.

-----Original Message-----
From: Steve Morgan [mailto:steve@xxxxxxx]
Sent: 17 August 2003 22:31
To: ukha_d@xxxxxxx
Subject: RE: [ukha_d] Mv1000....new cameras


> -----Original Message-----
> From: Brian G. Reynolds [mailto:brian.g.reynolds@xxxxxxx]
> As I now have 3 cameras connected I have set the default page
> to gallery but I have now got 1 B&W image then 2 squares with
> "Request Failed" in them....

This generally means that no signal is being received from the cameras.

Go back into the camera admin and redetect the cameras - you may find it
only recognises one now. Which suggests wiring. Are you using the
T-pieces with the terminators, or have you connected the cameras
straight into the inputs?

Steve



** UKHA2004 BE THERE! ** - start planning now.

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/