The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 19" Rack strong enough?



Normally the bolts are pretty strong.  I think the amps that I rack mounted
were quite a bit heavier than that ...
----- Original Message -----
From: David Anumudu
To: ukha
Sent: Wednesday, July 30, 2003 5:23 PM
Subject: [ukha_d] 19" Rack strong enough?


I am fitting 3 rack mount servers, each 4u in to a standard 19" rack
cabinet. The serverseach weigh about 10kg-15kg, and my concern is that they
are only attached at the front of the rack by the 4 screws, meaning the
rear
of the server case is not suspended.
are there brackets available to suspend the cases at the back of the
cabinet, or is that overkill?

cheers



Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.