The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Help with extending NTL cable


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Help with extending NTL cable
  • From: "Kevin Hawkins" <lists@xxxxxxx>
  • Date: Mon, 7 Apr 2003 17:58:38 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

The first thing I would do is check that if you remove all the middle
bits -
effectively if I read it right by going directly to the other side of your
fireplace that it all works OK. - I think this point is the direct source
onto the cable that NTL provide you if I read your info right.

If you still get the problem then you can involve NTL - they preset the
levels into each house from the boxes in your road - I had a similar
problem
with my cable modem - it would drop out for say 30 mins at a time. They
removed some attenuation in my street box and it went away.

I am guessing you are an NTL Digital subscriber - that way the STB could be
losing enough signal to fail to decode and create blank screens.

If however all works from the other side of the fireplace then NTL
won’t be
interested ( actually using the words NTL and interested in a related way
is
a bit of a paradox I’ve found  ) You’re then going to have to
look
carefully at your segment wiring - for example if you have any splitters or
dual outlet faceplates or a cable modem / FM aerial diplexer ?? If you go
to
any dual outlet faceplates the signal is attenuated even though only one
outlet may be in use.



Kevin



-----Original Message-----
From: steve.cooper@xxxxxxx [mailto:steve.cooper@xxxxxxx]
Sent: 07 April 2003 14:18
To: ukha_d@xxxxxxx
Subject: [ukha_d] Help with extending NTL cable




I've just finished rewiring our lounge complete with Satellite cable but we
keep getting a problem.  The NTL cable goes as follows:

NTL incoming -> faceplate on one side of fireplace -> faceplate in
loft ->
cable to another faceplate in loft -> face plate by TV (other side of
fireplace) -> NTL cable box

The problem that we are having is that every so often the picture blanks
out for a few seconds.  It's really intermittent (one or twice a night for
about 10 minutes) making it hard to test.  Anyone seen anything similar or
give me a few pointers of what to start checking.  Getting this sorted is
top of the SWMBO snagging list.

S.



___________________________________________________________________________

The information contained in this message is confidential and may be
legally privileged. If you are not the intended recipient, please do not
read, copy or otherwise use it and do not disclose it to anyone else.
Please notify the sender of the delivery error and then delete the
message from your system.

Any views or opinions expressed in this email are those of the author only.

Communications will be monitored regularly to improve our service and for
security and regulatory purposes.

Thank you for your assistance.

___________________________________________________________________________







Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.