[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
Re: Fanless Heatsink Recommendations
- To: ukha_d@xxxxxxx
- Subject: Re: Fanless Heatsink Recommendations
- From: Martin Greenwood <martin@xxxxxxx>
- Date: Thu, 27 Mar 2003 17:27:42 +0000
- Mailing-list: list ukha_d@xxxxxxx; contact
ukha_d-owner@xxxxxxx
- Reply-to: ukha_d@xxxxxxx
At 14:31 27/03/2003 +0000, you wrote:
>I am running an 866MHz Via C3 in my SME server box and would like to
>get rid of the current heatsink and fan and replace it with a fanless
>heatsink, can anyone recommend one.
I have just replaced my fan on my M10000 Via C3 card with a papst one.
It is very quiet. I bought it from here :-
http://www.pcsilent.de/en/products/papst.asp
The fan comes with only two wires attached, but there is a solder pad on
the fan for the third speed monitoring wire. I connected this and the
motherboard firmware displays the fan rpm. (Which I thought that I would
lose by changing from original)
I also changed the one inside the psu and the case. End result...I still
have three fans, but system is vastly quieter.
Martin
Home |
Main Index |
Thread Index
|