The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024

Latest message you have seen: Test Message Please ignore


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: OT: Maxtor 120Gb disks at Scan


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: OT: Maxtor 120Gb disks at Scan
  • From: "Phillip Harris" <phil@xxxxxxx>
  • Date: Sun, 22 Sep 2002 01:24:21 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx


> > > Maybe I've been very lucky then because I wouldn't buy
> anything but
> > > an IBM for IDE drives. Currently running 4 x 123.5 GB Deskstar
> > > drives and a 48 GB Travelstar drive.
> >
> > Fine, your expeience is OK at the moment ... How old are
> > those drives because if you do some digging you will find a
> > very high failure rate once the drives get to about 30 months
> > old.
>
> These drives I've got are all less than 6 months old.
> However, I have been using IBM drives for over 4 years
> without any problems ... maybe I've just been lucky.

That's twice you've been lucky! :-)

I've been using Maxtors since '91 and have never had problems...

> If we are talking SCSI drives, it would be Seagate all the way.

SCSI is still too expensive for me to use for hard discs ... I don't
need the speed.

Phil


Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.