The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Neat ideas for Toilet Ventilation - Motion Detection


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Neat ideas for Toilet Ventilation - Motion Detection
  • From: "Don McAllister" <donmc@xxxxxxx>
  • Date: Sun, 15 Sep 2002 14:07:45 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Ahem... "Motion" detection !!! Think about it :-)

> -----Original Message-----
> From: Chris Langridge [mailto:chrisl@xxxxxxx]
> Sent: 15 September 2002 08:08
> To: 'ukha_d@xxxxxxx'
> Subject: [ukha_d] Neat ideas for Toilet Ventilation - Motion Detection=
>
>
> There's a motion detection question at the end of this...
>
> I wonder if we've ever had a thread about PanFans or
> Ventalus? Both of these systems draw odours directly from the
> toilet bowl. A friend has a Ventalu and swears by it -
> however they are a bit pricy at =A3300 per install - also they
> require a special ducted seat. The PanFan appeals more
> becuase it is simply an inline fan which can be retrofitted
> into existing insatallations. It works by drawing air through
> overflow passage. The PanFan, which is cheap, is also an
> obvious candidate for incorporation into a HA control system like HV.<= BR> >
> PanFan do sell an IR sensor to go with their kit. It detects
> presence in the 'vicinity of the toilet area' and kicks the
> fan on. I'll find out the price of this controller tomorrow -
> but I was thinking that HV might do a more reliable and
> flexible job using a more 'standard' motion detector.
>
> So the question is:
> What kind of detection system is likely to be most effective.
> It has to be near the toilet bowl, otherwise the fan will go
> on when someone is brushing their hair, or having a bath. I
> have two rooms I wanna use this for - a WC only downstairs
> and a bathroom upstairs.
>
> A pressure switch in the loo seat was one idea - but I
> suspect that this will be unhygenic.
>
> As the cystern in both rooms is boxed in with stud work, I
> would have though that a PIR sensor set low in this stud work
> may work nicely. It needs to detect the back of one's calf at
> close range (ie when you're sitting on the john), and ignore
> people in the rest of the bath room.
>
> The other option might be some kind of beam break system like
> you see in Mission Impossible.
>
> Any ideas?
>
>
> Chris
>
>
http://www.wave.co.nz/~p= anfan/case.htm
http://www.ventalu.co.uk/ind= ex.htm


http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here -
http://groups.ya= hoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/te= rms/





Yahoo! Groups Spons= or
ADVERTISEMENT
3D""

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.