The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [ukha_d] Re: [OT] UltraATA133PCI RAID Controller - £19.99


  • To: ukha_d@xxxxxxx
  • Subject: RE: [ukha_d] Re: [OT] UltraATA133PCI RAID Controller - £19.99
  • From: steve.crick@xxxxxxx
  • Date: Wed, 23 Oct 2002 10:48:24 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Do you know who makes this card?

Am I going to see much performance increase using this card, over the
Promise ATA100 built into my MB?

I guess for 20 quid, it is worth the investment to give me more expansion room, in nothing else.

Steve

-----Original Message-----
From: Paul Gale [mailto:psghome@xxxxxxx]
Sent: 23 October 2002 09:36
To: ukha_d@xxxxxxx Subject: [ukha_d] Re: [OT] UltraATA133PCI RAID Controller - =A319.99


Good spot Mark. Just ordered.

--- In ukha_d@y..., "Mark McCall" <Mark@L...> wrote:
> http://www.maplin.co.uk= /email.asp?
userid=3DP1102&source=3Dimage&itemid=3D55298
>
> Was =A344.99 now =A319.99
>
>       RAID configurations protect your s= ystem from catastrophic
disk
> failures and system down-time while doubling the data transfer
rates of your
> hard disk drives. Breaks the 137GB barrier! Supports various types of large
> capacity hard disk drives.
>       Achieves burst data transfer rates= up to 133MB/sec when
connected to
> Ultra ATA/133 drives.
>
>       =B7 Compliant with Ultra ATA/133 s= pecification and PCI v2.2/v2.
> Plug-n-Play
>       =B7 Full backward support for Ultr= a ATA/100/66/33 standards
>       =B7 On-board flash BIOS for future= upgrade
>       =B7 Connect up to 4 IDE hard drive= s
>       =B7 RAID 0 (striping) interleaves = data across multiple hard
disk drives,
> which increases
>       disk system performance dramatical= ly
>       =B7 RAID 1 (Mirroring) simultaneou= sly writes data to two hard
drives for
> data redundancy
>       =B7 RAID 0+1 (Mirroring + Striping= ). Four hard drives are
required for
> this mode
>       =B7 Acts as a conventional (non-RA= ID) controller when not
configured for
> RAID
>       =B7 On-board BIOS supports booting= >from stripe
> set
>       =B7 Auto-detects drive types and f= ine tunes to the best
performance for
> each
>       =B7 Supports scatter/gather, multi= -threaded, multi-tasking and
automatic
> FIFO threshold
>       selection
>       =B7 Provides two independent Ultra= ATA channels for faster
data transfer
>       =B7 Full support ACPI (Advanced Co= nfiguration and Power
Interface) for
> advanced system
>       power management



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Y
our use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/


*
*******************************************************************
This email and any attachments are confidential to the intended
recipient and may also be privileged. If you are not the intended
recipient please delete it from your system and notify the sender.
You should not copy it or use it for any purpose nor disclose or
distribute its contents to any other person.
********************************************************************


Yahoo! Groups Spons= or
ADVERTISEMENT
3D""
3D""

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx

List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.