The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Audio Amplifiers DIY


  • To: <ukha_d@xxxxxxx>
  • Subject: RE: Audio Amplifiers DIY
  • From: "Des Gibbons" <des@xxxxxxx>
  • Date: Fri, 18 Oct 2002 09:38:56 +0100
  • Mailing-list: list ukha_d@xxxxxxx; contact ukha_d-owner@xxxxxxx
  • Reply-to: ukha_d@xxxxxxx

Thanks Frank,


I have seen some products that allow either the 232 or 485, and had assumed
they were pin compatible, doh!

In fact it was probably the simmsticks that I saw it on :)

Cheers, Des.

> -----Original Message-----
> From: Frank Mc Alinden [mailto:armagh@xxxxxxx]
> Sent: Friday, October 18, 2002 09:29
> To: ukha_d@xxxxxxx > Subject: Re: [ukha_d] Audio Amplifiers DIY
>
>
> Hi Des
>             The rs485 is an 8 pin device and rs232 is a 16 pin
> device.........It would be good if  the pcb had provision so either one or
> the other could be used..This is what Dontronics does with some
> of the simm
> stick boards........
>
> Frank
> ----- Original Message -----
> From: "Des Gibbons" <des@xxxxxxx>
> To: <ukha_d@xxxxxxx>
> Sent: Friday, October 18, 2002 6:13 PM
> Subject: RE: [ukha_d] Audio Amplifiers DIY
>
>
> >
> > > Now the questions.
> > > 1) Anyone actually interested ?
> >
> > Sounds very interesting Shane!
> >
> > > 2) RS232 or RS485 ?
> >
> > IIRC they are interchangeable, so a socket would be the best
> bet, and then
> > you can have a choice?
> >
> > >
> >
> > >
> > > Note at this stage I would only be implementing hardware support
> > > as I don't
> > > personally need the serial connections.
> >
> >
> > I am sure you will find some volunteers to sort out the software side :)
> >
> > Cheers, Des.
> >
> >
> >
> > http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx > > Subscribe:  ukha_d-subscribe@xxxxxxx > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > > List owner:  ukha_d-owner@xxxxxxx > >
> > List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>



http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx Subscribe:  ukha_d-subscribe@xxxxxxx Unsubscribe:  ukha_d-unsubscribe@xxxxxxx List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/




Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.