The UK Home Automation Archive

Archive Home
Group Home
Search Archive


Advanced Search

The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024


[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Clipsal C-Bus2



There are two protocols - the advanced one used for programming, and a
simple one used to respond to ASCII text. If you want to know the status
of a light you have to ask, and your software will be out of sync when
you operate a light switch.

Tim.

> -----Original Message-----
> From: Mark Harrison [mailto:Mark.Harrison@xxxxxxx]
> Sent: 15 October 2002 11:00
> To: ukha_d@xxxxxxx > Subject: RE: [ukha_d] Clipsal C-Bus2
>
> Tim,
>
> Is the serial interface (to PC) a published protocol, so one could
> interface with one's own software?
>
> ... or is it a shrink-wrapped application?
>
> M.
>
> -----Original Message-----
> From: Timothy Morris [mailto:timothy.morris@xxxxxxx]
> Sent: 15 October 2002 10:55
> To: ukha_d@xxxxxxx > Subject: RE: [ukha_d] Clipsal C-Bus2
>
>
> Not hugely expensive - 5.5k for:
>
> 24 dimmed 5A channels (Clipsal is only 1A per channel IIRC)
> 16 input, 8 output contact closure i/f to interface with Menvier alarm
> Serial i/f to PC
> Serial i/f to Murata MCU blind/curtain/screen controller
> 10 control plates each with 10 programmable buttons (plus 22 virtual
> buttons which will respond to IR)
> All low voltage wiring to connect the stuff up
>
> Tim
>
>
> > -----Original Message-----
> > From: Bricknell, Tony [mailto:tony.bricknell@xxxxxxx]
> > Sent: 15 October 2002 08:55
> > To: ukha_d@xxxxxxx > > Subject: RE: [ukha_d] Clipsal C-Bus2
> >
> > Now that's a bit _too_ much money for me... <g>
> >
> > -----Original Message-----
> > From: Timothy Morris [mailto:timothy.morris@xxxxxxx]
> > Sent: 14 October, 2002 18:00
> > To: ukha_d@xxxxxxx > > Subject: RE: [ukha_d] Clipsal C-Bus2
> >
> >
> > If anyone cares, I'll have a working Polaron installation in 3-4
weeks
> > time...
> >
> > Tim.
> >
> > ------------------------ Yahoo! Groups Sponsor
> >
> > http://www.automatedhome.co.uk
> > Post message: ukha_d@xxxxxxx > > Subscribe:  ukha_d-subscribe@xxxxxxx > > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > > List owner:  ukha_d-owner@xxxxxxx > >
> > List of UKHA Groups here -
> http://groups.yahoo.com/group/UKHA_Grouplists/
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
>
>
>
>
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
>
________________________________________________________________________
> This email has been scanned for all viruses by the MessageLabs SkyScan
> service. For more information on a proactive anti-virus service
working
> around the clock, around the globe, visit http://www.messagelabs.com
>
________________________________________________________________________
>
> ------------------------ Yahoo! Groups Sponsor
>
> http://www.automatedhome.co.uk
> Post message: ukha_d@xxxxxxx > Subscribe:  ukha_d-subscribe@xxxxxxx > Unsubscribe:  ukha_d-unsubscribe@xxxxxxx > List owner:  ukha_d-owner@xxxxxxx >
> List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>




Yahoo! Groups Sponsor
ADVERTISEMENT

http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe:  ukha_d-subscribe@xxxxxxx
Unsubscribe:  ukha_d-unsubscribe@xxxxxxx
List owner:  ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/


Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Home | Main Index | Thread Index

Comments to the Webmaster are always welcomed, please use this contact form . Note that as this site is a mailing list archive, the Webmaster has no control over the contents of the messages. Comments about message content should be directed to the relevant mailing list.