|
The UKHA-ARCHIVE IS CEASING OPERATIONS 31 DEC 2024
|
|
[Date Prev][Date
Next][Thread Prev][Thread Next][Date
Index][Thread Index]
RE: ICS on had wired ports
Winxp has a network bridgin feature, just go to network properties and
then select both networks (using CRTL) and then right click, the option
should be there
This is all off the top of my head, but we shall see
Scott
-----Original Message-----
From: Stuart Grimshaw [mailto:stuart@xxxxxxx]
Sent: 12 October 2002 12:12
To: ukha_d@xxxxxxx
Subject: [ukha_d] ICS on had wired ports
Is it possible to use a hardwired line & wireless port in the same
machine & route the traffic out via the wired lan using ICS?
Here's a crap picture:
Tinternet ---- Asus Router ---- LAN ---- WinXP - - - - Wireless
--- = Wirede
- - - = Wireless
Hope that's OK ....
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here -
http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
Yahoo! Groups
Sponsor |
ADVERTISEMENT
|
|
|
|
|
http://www.automatedhome.co.uk
Post message: ukha_d@xxxxxxx
Subscribe: ukha_d-subscribe@xxxxxxx
Unsubscribe: ukha_d-unsubscribe@xxxxxxx
List owner: ukha_d-owner@xxxxxxx
List of UKHA Groups here - http://groups.yahoo.com/group/UKHA_Grouplists/
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
Home |
Main Index |
Thread Index
|
|